Specifications

Nexo TS2400 (used with Nexo TS TD Controller 2.4)

Frequency Response	40Hz - 17KHz +/- 3dB
Usable Frequency Range	36Hz - 19KHz @ -6dB
Nominal Sensitivity	107dB SPL/1W @ 1m
Peak SPL	143dB Peak @ 1m
Dispersion Angles (H x V)	70 x 35 degrees
Crossover Frequencies	300Hz & 1.8KHz
Connectors	1 x 8-Pole Speakon
Height x Width x Depth	1022 x 791 x 597mm
Weight	105 Kg (231 lbs) net

Components

LF	2 x 15" 4 Ohm drivers, loaded by Touring System Vented Horn
MF	2 x Nexo patented 8 Ohm mid drivers, with heatsink and Touring System Horn
HF	1 x Neodymium magnet, 3" Titanium diaphragm, high temperature Ferrofluid cooled driver, Low Distortion Diffraction Throat, Interface Control Waveguide & Constant Directivity Horn

Nominal Impedance

Bass	2 x 4 Ohms or 2 Ohms paralleled
Mid-Top	4 Ohms

Recommended Amplifiers

Bass	2 x 700 to 1200Watts into 4Ohms or 1 x 1400 to 2400 Watts into 2 Ohms
Mid-Top	1 x 700 to 1200 Watts into 4 Ohms
	The same amplifier type should be used for all Bass & Mid-Top channels

The innovative load and unusual speaker layout of the LSub reduces distortion and cone displacement, thus, high-efficiency is maintained down to 28Hz.

Nexo LSub 2000 (used with Nexo LS TD Controller)

Frequency Response	30Hz - 120Hz +/- 3dB
Usable Frequency Range	28Hz - 130Hz @ -6dB
Nominal Sensitivity	106dB SPL/1W @ 1m
Peak SPL	141dB Peak @ 1m
Crossover Frequencies	50Hz & 120Hz
Connectors	1 x 4-Pole Speakon
Height x Width x Depth	1022 x 791 x 597mm
Weight	80 Kg (176 lbs) net

Components

2 x 18" 4 Ohm drivers LSub loaded

Nominal Impedence

2 x 4 Ohms or 2 Ohms paralleled

Recommended Amplifiers

2 x 800 to 1200Watts into 4Ohms or 1 x 1600 to 2400 Watts into 2 Ohms

Last edited by Paul Ellison on 3^rd January 2011